271″ Absen KLCOB Lite 1.2mm COB Video Wall Bundle – Fine Pitch LED Screen – W19.69′ x H11.07′ (6.00m x 3.38m) Complete Display Package for Conference Rooms, Lobbies, Churches, Events & Retail. HDMI Input

This bundle includes: 100 × Absen KLCOB Lite 1.2mm COB Indoor Display Panel, 1 × NovaStar MX2000 Pro Modular 8K Video Processor & Controller, 4 × NovaStar Fiber Converter CVT10S, 1 × NovaStar Input Card MX_2xHDMI_2.1, 1 × NovaStar Output Card MX_4x10G, 8 × Main Power Cable – 14AWG for MicroLED COB 0.93 & Absen KLCOB, 50 × Main DATA Cable for 960, MicroLED & Absen KLCOB Indoor (20ft), 1 × QuickLift Front Service Tool for MicroLED & Absen KLCOB, 16 × Absen KLCOB Lite 1.2mm COB Module, 1 × Absen KLCOB Lite 3-in-1 Integrated Board, 8 × Absen KLCOB Lite 1.2mm COB Module, 1 × Wooden Crate.

The Absen KLCOB Lite 1.2mm series brings Absen’s flip-chip COB platform—engineered by one of the world’s most established LED display manufacturers—to its most accessible price point. Purpose-built for professional spaces where the room, not the front row, sets the requirement, this 271″ configuration arranges 100 cabinets in a seamless 10 × 10 array, each panel delivering a native 480×270 matrix at a fine 1.25mm pixel pitch for a combined 4800 × 2700 canvas.

Crafted from high-precision die-cast aluminum, the KLCOB Lite cabinet is ultra-slim, rigid, and machined for flawless mechanical fit. Measuring just 39.5mm (1.56″) thick and sized at 600mm × 337.5mm (23.62″ × 13.29″), it weighs only 4 kg (8.81 lbs)—a structural load of just 19.8 kg/m²—light enough for standard commercial wall mounting with minimal depth and clean integration.

Each cabinet is built from eight 150 × 168.75mm COB modules in a 4 × 2 arrangement, engineered for seamless alignment, consistent visual uniformity, and full interchangeability across the display surface. The fully encapsulated COB face seals every LED behind a protective surface—a decisive durability advantage in lobbies, conference rooms, and high-traffic spaces where a display must shrug off contact, dust, and routine cleaning. Maintenance is streamlined with full front access, allowing service directly from the viewing side without rear clearance or downtime.

Designed for dependable performance in professional indoor environments, the system is driven by Flip-Chip COB LEDs processed at up to 13-bit grayscale with a 3840Hz refresh rate, delivering approximately 600 cd/㎡ of brightness, a ≥15,000:1 contrast ratio, and a wide 160° (H) × 160° (V) viewing angle. Power consumption is efficiently managed at a maximum of 71W per panel—equating to roughly 242 BTU of heat output—running reliably on AC 100–240V / 50–60Hz with locking powerCON power connections and RJ45 CAT5e data distribution in a fully fanless, silent design.

The system is compatible with precision wall-mounting structures, offering a low-profile, rigid, and alignment-true installation footprint with an IP40-rated front face and IP21-rated rear. This mounting approach is tailored for indoor applications where seamless COB performance, minimal depth, and full front service are essential. Additionally, the KLCOB Lite series is CCC, FCC, and CE certified, supporting compliance with established electrical safety and electromagnetic compatibility standards in professional environments.

Tuned for real-world viewing distances, the 1.25mm configuration achieves a pixel density of 640,000 pixels per square meter—from approximately 4 feet back, the image is visually indistinguishable from far finer pitches at a substantially lower cost per square foot. The combined 4800 × 2700 resolution makes it ideal for conference rooms, lobbies, training spaces, houses of worship, and retail environments where impact and reliability matter most.

What truly sets the KLCOB Lite series apart is its combination of Flip-Chip COB architecture, a fully sealed display surface, and front-serviceable module construction. This advanced design enhances signal stability, thermal behavior, and long-term reliability, resulting in exceptionally stable visuals, extended component lifespan, and reduced risk of pixel damage during service. Built by Absen and tuned for value, the KLCOB Lite 1.2mm series delivers seamless COB performance, durability, and serviceability at scale.